Flexible Automotive Part Inspection and Measurement - Seals and Trim

The Perfect Solution For the Inspection of Automotive Parts - Seals and trim (e.g. door trim, weather seals, etc...)

  • Automatically compare difficult-to-inspect flexible parts, such as automotive seals and trim, against their CAD data (no more overlays!)
  • The system's proprietary CAD Auto-Align™ tool automatically lines up the CAD to the part, along one or multiple datums or by doing an overall "best fit".
  • The system's proprietary CAD Auto-Pass/Fail™ tool automatically produces an operator-independent PASS/FAIL result.
  • The system works equally well on both fixtured and unfixtured parts.
  • Demonstrated accurate, repeatable and operator-independent results, directly on the shop floor!
  • The system supports both uniform and variable tolerances. You can apply tighter tolerances in critical areas and looser tolerances elsewhere.
  • Automatically measure and display deviations from nominal and quickly identify out-of-tolerance areas.
  • Automatically collect measurements, statistics, images and other data for complete documentation
  • Much faster than traditional approaches and completely eliminates operator subjectivity!.
  • The system is extremely easy to use: it can be setup so that - for the operator - everything is done through the barcode reader.
  • The system can easily deal with part distortion. It is perfectly suited to overcome the difficult challenges of inspection and measurement of flexible automotive parts, such as seals and trim.
flexible automotive seal inspection and CAD overlay comparison on a VisionGauge® Digital Optical Comparator
automotive seal inspection and CAD overlays on a VisionGauge® Digital Optical Comparator
Comparing a flexible automotive seal against its CAD data

The system produces an extremely crisp and clear super-high-resolution image. You can see all of the fine details on your part!

Automotive trim inspection on a VisionGauge Digital Optical Comparator

Front (reflected) illumination allows you to clearly see internal and surface features, along with the part's outer profile.

CAD Auto-Align and CAD Auto-Pass/Fail tools for flexible automotive components inspection

Automatically compare a part to its CAD data and get an accurate, repeatable and operator-independent PASS/FAIL result.

The VisionGauge® Digital Optical Comparator is the new standard for inspecting flexible extruded seals and trim in the automotive industry.

Download a .pdf version of this VisionGauge® Digital Optical Comparator Application note here.

 Inspection of Flexible Automotive Trim and Seals - Automotive Component Inspection

Please wait until you receive confirmation after clicking Submit.

Machine Vision Products Application Bulletins: