VisionGauge software and systems for visual inspectionVISIONx machine vision software and visual inspection systemsVisionGauge OnLine machine vision software
ADVANCED VISUAL INSPECTION AND HIGH ACCURACY MEASUREMENT SOLUTIONS

FAQ #2.5: 

Using a FlashPoint 3D™ video acquisition board, everything works fine right after I boot the computer, but if I do not use the system for a certain length of time (maybe 15 mins. or 1 hour...) and then start using it again, the "live video" image is all "pink & green".

Solution:

This is due to a problem between the display drivers of the 3D™ board and some versions of Windows™ running on certain computers. You'll have to reboot your computer to reset everything.

You can avoid this problem once and for all by changing a few display settings. If you have a "screen saver" turned on, you should turn it off (i.e. set your screen saver to "none"). You should also turn all "power saving" features off. Both of these things are done through the Windows™ "Display Properties" dialog box, which you can access via "My Computer | Control Panel | Display".


visionx copyright